Public Recipe
Zany's No Slime Castille
Solid Soap · NaOH · 100 g oil load · 5% superfat · 1 views · 0 saves
This is a tried and true recipe that I've made several times. Others have tried it with excellent results. Be sure to keep the bar high and dry between uses by using a soap-saver-type soap dish. Tweak to your heart's delight! (Like, do I even need to say that?! ) ZANY’S NO SLIME OLIVE OIL CASTILE Ingredients: Olive oil, water, sea salt, sodium bicarbonate. 1) MAKE FAUX SEAWATER - Use for water portion of the lye solution. 1 quart warm water (32 oz) 1 Tablespoon sea salt 1 Tablespoon sodium bicarbonate (baking soda) I make up a quart at a time and store it in the fridge until I need it. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2) MAKE LYE SOLUTION - Mix and allow to cool to 35°C - 40°C (100°F - 110°F). 1.7:1 Water to Lye Ratio (Note decimal and colon) 0% Super Fat/Lye Discount Notes: I’ve tried 2:1 and 1.5:1. 1.5:1 gets almost too hard and 1:2 is okay but a bit slimey, so, for me, 1.7:1 is the ideal. Olive oil is high in unsaponifiables; so 0% SF works best to reduce slippery slime. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Prepare lye solution and set it in the sink to cool. Weigh olive oil into soap pot. Warm to 35°C - 40°C (100°F - 110°F). Combine when lye and oils are within -12°C (10°F) of each other. SB on and off to emulsion stage (5 - 25 minutes, depending on grade of olive oil.) Slowly pour into mold. Tap to remove bubbles. Spritz lightly with alcohol. Cover with plastic wrap. Insulate. Leave soap undisturbed for 12-24 hours. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ UNMOLD in 12-24 hours CUT Day 2 CURE Ready to ship in 2 weeks. 6 weeks is best. The longer the cure the better the soap. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Unscented, this soap is suitable for babies, sensitive skin, and for cancer patients undergoing radiation. Add 5
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Zany's No Slime Castille
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 12.9 g
- Liquid
- 21.9 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 100% | 100.0 g |
Soap quality
- Bubbly lather
- 0
- Cleansing
- 0
- Condition
- 82
- Hardness
- 16
- Longevity
- 16
- Creamy lather
- 16
Fatty acids
- Lauric
- 0
- Myristic
- 0
- Palmitic
- 13
- Stearic
- 3
- Ricinoleic
- 0
- Oleic
- 71
- Linoleic
- 10
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil
- Estimated raw material cost: $0.00
- Olive Oil is above the recommended maximum usage range.
Printout generated from a public SoapCalc recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapCalc
Zany's No Slime Castille
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil