Public Recipe
Rain Forest 1
mixed · 100 g oil load · 5% superfat · 4 views · 0 saves
Goal: trying to improve Tallow, added Amazon butters.Directions: Put oils on to heat and put Lanolin on to warm. Put XXXX oz distilled water in metal container in an ice bath. Add XXXX oz 200X Aloe (single strength) and large cotton ball of silk in. Add lye. Once below 140 degrees, add XXXX oz Goat Milk, XXX oz glycerin Add lye water mix once oils are 160-170 degrees. Add Bentonite Clay. (XXXX TBSP) Add XXXX oz EDTA dissolved in a small amount of distilled water. Add Lanolin at trace (6.4 oz) Add Fragrance oil at 3% for James Bond. 3% for Badass Add XXX tsp Sodium Lactate.243 oz batch.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 15% of oils lack fatty-acid data (Bacuri Butter). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Rain Forest 1
mixed
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 11.3 g
- Liquid
- 27.2 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Palm Oil | oil | 20% | 20.0 g |
| Shea Butter | oil | 5% | 5.0 g |
| Cocoa Butter | oil | 5% | 5.0 g |
| Kokum Butter | oil | 10% | 10.0 g |
| Beef Tallow | oil | 25% | 25.0 g |
| Stearic Acid | oil | 20% | 20.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Glycerin | additive | 0% | 0.0 g |
| Bentonite Clay | additive | 0% | 0.0 g |
| Aloe Powder | additive | 0% | 0.0 g |
| Bacuri Butter | oil | 15% | 15.0 g |
| EDTA | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 2
- Cleansing
- 2
- Condition
- 36
- Hardness
- 62
- Longevity
- 60
- Creamy lather
- 60
Fatty acids
- Lauric
- 1
- Myristic
- 1
- Palmitic
- 20
- Stearic
- 40
- Ricinoleic
- 0
- Oleic
- 32
- Linoleic
- 4
- Linolenic
- 0
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Palm Oil, Shea Butter, Cocoa Butter, Kokum Butter
- Estimated raw material cost: $0.00
- Sodium Lactate is below the recommended minimum usage range.
- Glycerin is below the recommended minimum usage range.
- Bentonite Clay is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Rain Forest 1
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Tallow, Elaeis Guineensis Oil, Stearic Acid, Bacuri Butter, Garcinia Indica Seed Butter, Butyrospermum Parkii Butter, Theobroma Cacao Seed Butter, Sodium Lactate, Glycerin, Bentonite, Aloe Powder, EDTA