Public Recipe
Pine tar salve- recc by Zing
non_soap · 210 g oil load · 5% superfat · 5 views · 0 saves
From Zing " I recently found my recipe and relieved. Sorry, I don't have time to convert to percentages. It's 120 g coconut oil 30 g pine tar 38 g beeswax 12 g castor oil 1/4 teaspoon charcoal I poured it into 6 little tins. It's goopier than my normal lotion bars but my notes said to try it in silicon molds next time. I was alone among my testers to like the scent - like a campfire" Made a batch on April 4th/2025 Used olive oil instead of CO. Added extra 10gr of beeswax to compensate for liquid oil and because i used beeswax in pellets. Temp was cool in the house. It had a good firmness too salve.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 23% of oils lack fatty-acid data (Yellow Beeswax). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Pine tar salve- recc by Zing
non_soap
- Oil load
- 210 g
- Superfat
- 5%
- Lye
- 21.7 g
- Liquid
- 32.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 57.143% | 120.0 g |
| Castor Oil | oil | 5.714% | 12.0 g |
| Yellow Beeswax | oil | 22.857% | 48.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Pine Tar, lye calc only no FA | oil | 14.286% | 30.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 1
- Cleansing
- 0
- Condition
- 68
- Hardness
- 12
- Longevity
- 12
- Creamy lather
- 19
Fatty acids
- Lauric
- 0
- Myristic
- 0
- Palmitic
- 10
- Stearic
- 2
- Ricinoleic
- 6
- Oleic
- 53
- Linoleic
- 8
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Castor Oil, Yellow Beeswax, Pine Tar, lye calc only no FA
- Estimated raw material cost: $0.00
- Yellow Beeswax is above the recommended maximum usage range.
- Activated Charcoal is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Pine tar salve- recc by Zing
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Olea Europaea Fruit Oil, Cera Alba, Pine Tar, lye calc only no FA, Ricinus Communis Seed Oil, Charcoal Powder