Public Recipe
Dr. Squatch Pine Tar Bar Soap Dupe no lard!
Solid Soap · NaOH · 100 g oil load · 5% superfat · 5 views · 0 saves
Use ice cubes. Have all ingredients ready to go before starting. Pour salt over the ice, then use the lye. Melt all hard fats and butters, pour in the liquid oils and pine tar. Once oils are combined, add the pumice, oats and the charcoal. Mix 1tsp of water to the kaolin clay, then add the essential oils. Temperature of the oils and the lye need to be at 90 degrees or under. Add the lye solution to the oils and hand mix. DO NOT USE IMMERSION BLENDER cover with a towel and allow to sit over night. FROZEN WATER!!!
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
Dr. Squatch Pine Tar Bar Soap Dupe no lard!
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 5%
- Lye
- 14.4 g
- Liquid
- 34.5 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Olive Oil | oil | 21.539% | 21.5 g |
| Coconut Oil 76 | oil | 30.77% | 30.8 g |
| Castor Oil | oil | 4.615% | 4.6 g |
| Sunflower Oil | oil | 10% | 10.0 g |
| Shea Butter | oil | 6.154% | 6.2 g |
| Kaolin Clay | additive | 0% | 0.0 g |
| Activated Charcoal | additive | 0% | 0.0 g |
| Salt | additive | 0% | 0.0 g |
| Canola Oil | oil | 17.691% | 17.7 g |
| Pine Tar, lye calc only no FA | oil | 9.231% | 9.2 g |
| Oatmeal | additive | 0% | 0.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 21
- Cleansing
- 21
- Condition
- 53
- Hardness
- 33
- Longevity
- 12
- Creamy lather
- 16
Fatty acids
- Lauric
- 15
- Myristic
- 6
- Palmitic
- 7
- Stearic
- 5
- Ricinoleic
- 4
- Oleic
- 35
- Linoleic
- 13
- Linolenic
- 2
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Olive Oil, Coconut Oil 76, Castor Oil, Sunflower Oil
- Estimated raw material cost: $0.00
- Coconut Oil 76 is above the recommended maximum usage range.
- Kaolin Clay is below the recommended minimum usage range.
- Activated Charcoal is below the recommended minimum usage range.
- Salt is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
Dr. Squatch Pine Tar Bar Soap Dupe no lard!
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Cocos Nucifera Oil, Olea Europaea Fruit Oil, Canola Oil, Helianthus Annuus Seed Oil, Pine Tar, lye calc only no FA, Butyrospermum Parkii Butter, Ricinus Communis Seed Oil, Kaolin, Charcoal Powder, Sodium Chloride, Oatmeal