Public Recipe
20% Shea, Vegan, Palm-Free in, naturally White Bar Soap, single TS loaf
Solid Soap · NaOH · 100 g oil load · 3% superfat · 4 views · 0 saves
Measure out 1:1 master batched lye. Measure the additional distilled water and heat in the microwave until hot. Add sodium citrate, sorbitol powder and sodium lactate (optional) to hot water and stir until dissolved. Add to lye solution and set aside. Heat soy wax, Shea, butter, and coconut oil to 165+ degrees Fahrenheit. Stir to blend the hard oils, then add sunflower oil and castor oil. Stick stick blend all the oils to homogenize them. Then set the mixture aside until all air bubbles have disappeared, and the oils are clear. Stir fragrance oil or essential oil into the oil blend. Stir prepared lye solution into the oils. Keep stirring with a whisk and/or spatula until it reaches emulsion or very light trace. Add colors and design as desired.
Soap profile
Bubbly, cleansing, condition, hardness, longevity, and cream relative to the selected soap type.
Profile incomplete — 17% of oils lack fatty-acid data (Soy Wax GW415). Values reflect the known oils only.
Target 18-30
Target 10-20
Target 44-69
Target 29-54
Target 25-50
Target 16-30
Fatty acid balance
Weighted from the oil phase using the current recipe percentages.
Printable formula
20% Shea, Vegan, Palm-Free in, naturally White Bar Soap, single TS loaf
Solid Soap · NaOH
- Oil load
- 100 g
- Superfat
- 3%
- Lye
- 13.6 g
- Liquid
- 32.7 g
Ingredients
| Ingredient | Type | Percent | Weight |
|---|---|---|---|
| Coconut Oil 76 | oil | 16% | 16.0 g |
| Castor Oil | oil | 5% | 5.0 g |
| Shea Butter | oil | 20% | 20.0 g |
| Sodium Lactate | additive | 0% | 0.0 g |
| Sodium Citrate | additive | 0% | 0.0 g |
| Sorbitol | additive | 0% | 0.0 g |
| Sunflower Oil, high oleic | oil | 42% | 42.0 g |
| Soy Wax GW415 | oil | 17% | 17.0 g |
Non-oil entries are shown as percentage of oil load for maker planning.
Soap quality
- Bubbly lather
- 13
- Cleansing
- 13
- Condition
- 65
- Hardness
- 30
- Longevity
- 17
- Creamy lather
- 22
Fatty acids
- Lauric
- 9
- Myristic
- 4
- Palmitic
- 4
- Stearic
- 13
- Ricinoleic
- 5
- Oleic
- 55
- Linoleic
- 4
- Linolenic
- 1
Batch preparation checklist
- Verify formula, lye type, scale accuracy, and all ingredient labels.
- Wear eye protection, gloves, long sleeves, and prepare a ventilated lye-safe area.
- Weigh oils, additives, scent, lye, and liquid in separate clearly labeled containers.
- Confirm mold capacity, batch lot code, cure rack space, and cleanup plan.
- Record actual temperatures, substitutions, trace notes, pour time, and unmold date.
Review notes
- Base oil total: 100.0%
- Primary oils: Coconut Oil 76, Castor Oil, Shea Butter, Sunflower Oil, high oleic
- Estimated raw material cost: $0.00
- Sodium Lactate is below the recommended minimum usage range.
- Sodium Citrate is below the recommended minimum usage range.
- Sorbitol is below the recommended minimum usage range.
Printout generated from a public SoapPilot recipe. Recalculate and verify every formula before production; this page is not professional safety, medical, cosmetic, or legal advice.
Label preview
Public recipe page with INCI-backed label visualization.
Label editor
Build a standard front label and an INCI-based back label from the recipe.
SoapPilot
20% Shea, Vegan, Palm-Free in, naturally White Bar Soap, single TS loaf
Soap
Net wt. 100 g
Back label
Ingredients (INCI)
Sunflower Oil, high oleic, Butyrospermum Parkii Butter, Soy Wax GW415, Cocos Nucifera Oil, Ricinus Communis Seed Oil, Sodium Lactate, Sodium Citrate, Sorbitol